Section 6: Elevation View
Anchor: #i1003346Elevation View Example
The elevation view checklist, presented in Section 3, should be followed to ensure that the details are accurate and complete. Cap and backwall reinforcing shall normally be shown on the elevation view. Wingwall reinforcing and bearing seat dowels D will not normally be shown.
NOTE: Bars S spacing shown is for example only. Bars H spacing is shown for the most common “C Beam Abutment.” For type A or B beams use 2 equal spaces and 4 equal spaces for type IV beams.
Figure 3-10. Elevation View Example. .
Online users can click 3-10 to view this illustration in PDF