7. Laboratory Qualification Program | Quality Assurance Program | TxDOT Manual System

♦Manual Notice 2005-1
►1. Introduction
- ►1. Overview
  - ♦Introduction
  - ♦Definitions
  - ♦Remarks
►2. Acceptance Program
►3. Independent Assurance Program
- ♦1. Overview
- ♦2. Sampling and Testing Frequency
- ♦3. Testing Equipment
- ♦4. Testing Personnel
- ♦5. Comparing Test Results
- ♦6. Annual Report of IA Program Results
►4. Materials Certification
- ♦1. Overview
►5. Conflict of Interest
- ♦1. Overview
►6. Sampling and Testing Personnel Qualification Program
- ♦1. Purpose
- ♦2. Personnel Qualification
- ♦3. Who Must be Qualified?
- ♦4. Who Can Qualify Sampling and Testing Personnel?
- ♦5. Qualification Procedure
- ♦6. Documentation
- ♦7. Disqualification
▼7. Laboratory Qualification Program
►8. Acceptable Tolerance Limits for Independent Assurance
- ♦1. Acceptable Tolerance Limits
►9. Frequency for System Approach Independent Assurance Testing
- ♦1. Overview
- ♦2. Required Frequencies and Activities

Chapter 7: Laboratory Qualification Program

Anchor: #CEGIJGDJ

Section 1: Purpose

This program provides uniform statewide procedures to ensure that laboratory facilities and equipment are adequate for the performance of required sampling and testing methods.