Search for the word or phrase: Help    Advanced

Search in: this manual only. all manuals.

• ♦Manual Notice 2005-1
• ►1. Introduction
  • ►1. Overview
    • ♦Introduction
    • ♦Definitions
    • ♦Remarks
• ►2. Acceptance Program
  • ♦1. Overview
  • ♦2. Sampling and Testing Frequency and Location
  • ♦3. Quality Control Sampling and Testing
  • ♦4. Dispute Resolution System
• ►3. Independent Assurance Program
  • ♦1. Overview
  • ♦2. Sampling and Testing Frequency
  • ♦3. Testing Equipment
  • ♦4. Testing Personnel
  • ♦5. Comparing Test Results
  • ♦6. Annual Report of IA Program Results
• ▼4. Materials Certification
  • ♦1. Overview
• ►5. Conflict of Interest
  • ♦1. Overview
• ►6. Sampling and Testing Personnel Qualification Program
  • ♦1. Purpose
  • ♦2. Personnel Qualification
  • ♦3. Who Must be Qualified?
  • ♦4. Who Can Qualify Sampling and Testing Personnel?
  • ♦5. Qualification Procedure
  • ♦6. Documentation
  • ♦7. Disqualification
• ►7. Laboratory Qualification Program
  • ♦1. Purpose
  • ♦2. Laboratories to be Qualified
  • ♦3. Laboratory Qualification Responsibility
  • ♦4. Qualification Process
  • ♦5. Calibration Standards and Frequencies for Laboratory Equipment
  • ♦6. Frequency for Laboratory Qualification
  • ♦7. Non-compliance
  • ♦8. Documentation
  • ♦9. Dispute Resolution
• ►8. Acceptable Tolerance Limits for Independent Assurance
  • ♦1. Acceptable Tolerance Limits
• ►9. Frequency for System Approach Independent Assurance Testing
  • ♦1. Overview
  • ♦2. Required Frequencies and Activities

Chapter 4: Materials Certification

Anchor: #CIHDFCHI

Section 1: Overview

A materials certification, conforming in substance to the example, 'Letter of Certification of Materials Used,' shall be submitted to the Federal Highway Administration (FHWA) Division Administrator for each construction project that is subject to FHWA construction oversight activities.