Section 10: Herbicide Rig
Figure 3-9. The herbicide rig is used to apply anti-icing liquids prior to an approaching storm. It is also used for de-icing applications during the storm.
Anchor: #i1004266Pre-storm activities
Well before a storm strikes, be sure to:
- complete preventive maintenance checklist
- adapt herbicide rig to spray liquid de-icer
- flush tank to prevent contamination
- service auxiliary motor
- flush pump for correct operation
- operate all systems to ensure correct operation
- check all electrical components for correct operation
- perform trial run with water to assure correct rates.
During the storm activities
While using the equipment during a storm:
- perform occasional walk around to check for any problems (lights, leaks)
- repair any problem as necessary to ensure correct operation of equipment.
Post storm activities
Once the storm is over, be sure to:
- flush system
- clean all equipment associated with application
- check equipment for proper operation before next storm
- service equipment as necessary to prepare for next storm.