Section 7: Tail Gate Spreader
Figure 3-6. Tail gate spreaders are used to apply de-icing and anti-icing materials. They are a spinner type applicator and operate via a hydraulic system.
Anchor: #i1003958Pre-storm activities
Well before a storm strikes, be sure to:
- check all hydraulic lines and fittings for leaks or wear
- check bearings in spinners
- check oil in hydraulic motors
- check mounting brackets that attach to the dump truck
- lubricate all moving parts
- mount to truck to assure proper operation.
During the storm activities
While using the equipment during a storm:
- perform occasional walk around to check for problems (lights, leaks, etc.)
- check for accuracy of material application.
Post storm activities
Once the storm is over, be sure to:
- clean equipment
- check for any hydraulic leaks
- lubricate all points on bearings and moving parts
- check all hydraulic hoses and fittings for wear
- check all welds for fatigue cracks.