• ♦Manual Notice 2018-1
• ►1. Definitions
  • ♦1. Definitions
• ►2. Introduction
  • ♦1. Overview
  • ♦2. Nondiscrimination Statement
  • ►3. Nondiscrimination Authorities
    • ♦Title VII of the Civil Rights Act (1964)
    • ♦Form FHWA-1273
    • ♦Title 49, Code of Federal Regulations, Part 21
    • ♦Title 23 CFR 230
• ►3. Program Guidelines
  • ♦1. Overview
  • ♦2. Training Programs
• ►4. Contractor Responsibilities
  • ♦1. Overview
  • ♦2. Reimbursement
  • ♦3. Records
  • ♦4. Compliance
  • ♦5. Good Faith Effort
• ►5. Trainee Guidelines
  • ♦1. Overview
  • ♦2. Trainee Selection
  • ♦3. Wage Rates
• ►6. Goal Credit Guidelines
  • ♦1. Overview
  • ♦2. Goal Credit
• ►7. OJT Program Areas
  • ♦1. Overview
  • ►2. Contractor-Based Goals
    • ♦7.2.1 Goal Methodology
    • ♦7.2.2 Reporting Requirements
    • ♦7.2.3 Banking Credit
  • ►3. Project-Specific Goals
    • ♦7.3.1 Goal Methodology
    • ♦7.3.2 Reporting Requirements
• ►8. Department Responsibilities
  • ♦1. Overview
  • ♦2. Monitoring Requirements
  • ♦3. Annual Report
• ►9. Supportive Services (Pursuant to 23 CFR Part 230.113(f)(1)(2))
  • ♦1. Overview
  • ♦2. Texas Construction Career Academy
• ►A. Federal On-the-Job Training Program Special Provision
  • ♦1. Special Provision to Item 000 (000-2683 (04)) On-the-Job Training Program
  • ♦2. Special Provision On-the-Job Training Program for Design-Build and Comprehensive Development Agreements (Federal-Aid Projects Only)
• ▼B. Overview of Training Programs
  • ♦1. Training Classifications
  • ►2. Code Listing
    • ♦ASPHALT RAKER – code 9106
    • ♦BATCHING PLANT OPERATOR, ASPHALT - code 9112
    • ♦BATCHING PLANT OPERATOR, CONCRETE – code 9115
    • ♦CONCRETE FINISHER, PAVING AND STRUCTURES – code 9124
    • ♦ELECTRICIAN* – code 9139
    • ♦TELECOMMUNICATION TECHNICIAN* – code 9143
    • ♦COMMUNICATIONS CABLE INSTALLER – code 9144
    • ♦TRAFFIC SIGNAL/LIGHT POLE WORKER* – code 9145
    • ♦FORM BUILDER/SETTER, STRUCTURES – code 9151
    • ♦FORM SETTER, PAVING AND CURB – code 9160
    • ♦LABOR, UTILITY – code 9175
    • ♦MECHANIC – code 9187
    • ♦SERVICER – code 9194
    • ♦PAINTER, STRUCTURES – code 9196
    • ♦PILEDRIVER – code 9202
    • ♦PIPELAYER - code 9205
    • ♦BLASTER – code 9214
    • ♦ASPHALT DISTRIBUTOR OPERATOR – code 9300
    • ♦ASPHALT PAVING MACHINE OPERATOR - code 9303
    • ♦BROOM OR SWEEPER OPERATOR – code 9305
    • ♦CRAWLER TRACTOR OPERATOR - code 9306
    • ♦CONCRETE PAVING CURING, FLOAT, TEXTURING MACHINE OPERATOR – code 9315
    • ♦CONCRETE PAVEMENT FINISHING MACHINE OPERATOR - code 9318
    • ♦JOINT SEALER – code 9329
    • ♦CONCRETE SAW OPERATOR – code 9333
    • ♦SUBGRADE TRIMMER – code 9339
    • ♦SMALL SLIPFORM MACHINE OPERATOR – code 9341
    • ♦CRANE OPERATOR, LATTICE BOOM 80 TONS OR LESS - code 9342
    • ♦CRANE OPERATOR, LATTICE BOOM OVER 80 TONS* – code 9343
    • ♦CRANE OPERATOR, HYDRAULIC 80 TONS OR LESS – code 9344
    • ♦CRANE OPERATOR, HYDRAULIC OVER 80 TONS – code 9345
    • ♦LOADER/BACKHOE OPERATOR – code 9346
    • ♦EXCAVATOR OPERATOR, 50,000 POUNDS OR LESS – code 9347
    • ♦EXCAVATOR OPERATOR, OVER 50,000 POUNDS – code 9348
    • ♦CRUSHER OR SCREEN PLANT OPERATOR – code 9351
    • ♦FOUNDATION DRILL OPERATOR, CRAWLER MOUNTED – code 9360
    • ♦FOUNDATION DRILL OPERATOR, TRUCK MOUNTED – code 9363
    • ♦FRONT END LOADER, 3 CY OR LESS – code 9369
    • ♦FRONT END LOADER, OVER 3 CY – code 9372
    • ♦MILLING MACHINE OPERATOR – code 9380
    • ♦RECLAIMER/PULVERIZER OPERATOR – code 9384
    • ♦MOTOR GRADER OPERATOR, FINE GRADE* – Code 9390
    • ♦MOTOR GRADER OPERATOR, ROUGH – code 9393
    • ♦PAVEMENT MARKING MACHINE OPERATOR – code 9396
    • ♦CONCRETE/GUNITE PUMP OPERATOR – code 9399
    • ♦ROLLER OPERATOR, ASPHALT - code 9402
    • ♦ROLLER OPERATOR, OTHER – code 9405
    • ♦SCRAPER OPERATOR – code 9411
    • ♦OFF ROAD HAULER – code 9413
    • ♦SELF-PROPELLED HAMMER OPERATOR – code 9417
    • ♦AGRICULTURAL TRACTOR OPERATOR – code 9428
    • ♦TRENCHING MACHINE OPERATOR, LIGHT – code 9437
    • ♦TRENCHING MACHINE OPERATOR, HEAVY – code 9440
    • ♦TUNNELING MACHINE OPERATOR, HEAVY – code 9441
    • ♦TUNNELING MACHINE OPERATOR, LIGHT – code 9442
    • ♦PERCUSSION OR ROTARY DRILL OPERATOR – code 9443
    • ♦BORING MACHINE OPERATOR – code 9444
    • ♦DIRECTIONAL DRILLING OPERATOR – code 9445
    • ♦DIRECTIONAL DRILLING LOCATOR – code 9446
    • ♦REINFORCING STEEL WORKER – code 9500
    • ♦STRUCTURAL STEEL WORKER – code 9509
    • ♦SIGN ERECTOR – code 9513
    • ♦SPREADER BOX OPERATOR – code 9515
    • ♦WORK ZONE BARRICADE SERVICER – code 9520
    • ♦TRUCK DRIVER, SINGLE AXLE – code 9600
    • ♦TRUCK DRIVER, SINGLE OR TANDEM AXLE DUMP TRUCK – code 9606
    • ♦TRUCK DRIVER, TANDEM AXLE TRACTOR WITH SEMI TRAILER – code 9607
    • ♦TRUCK DRIVER LOWBOY- FLOAT – code 9609
    • ♦TRUCK DRIVER TRANSIT-MIX – code 9612
    • ♦BOOM TRUCK OPERATOR – code 9615
    • ♦STRUCTURAL STEEL WELDER* – code 9705
    • ♦WELDER – code 9706
    • ♦SLURRY SEAL OR MICRO-SURFACING MACHINE OPERATOR – code 9708
• ►C. Reporting Forms
  • ►1. Contractor On-the-Job Training Plan Form
    • ♦Form 2203
  • ►2. Federal On-the-Job Training Program Enrollment Form
    • ♦Form 2201
  • ►3. Federal On-the-Job Training Program Monthly Reporting Form
    • ♦Form 2202
  • ►4. Labor Standards Review Form
    • ♦Form 2220, Page 1 of 2
    • ♦Form 2220, Page 2 of 2
• ♦D. Federal Regulation 23 CFR Part 230

Anchor: #DQIWVMDD

Appendix B: Overview of Training Programs

Anchor: #i1027812

Section 1: Training Classifications

One credit shall be counted for each trainee who graduates from the program.

Two goal credits shall be counted for each trainee who graduates from the more technical training classifications with more than 2080 maximum training hours. These training classifications are denoted by an asterisk (*).

Table B1.

Code	Training Classification	Maximum Hours
9106	Asphalt Raker	520
9112	Bathing Plant Operator, Asphalt	720
9115	Batching Plant Operator, Concrete	720
9124	Concrete Finisher, Paving and Structures	1040
9139	Electrician*	4160
9143	Telecommunication Technician*	2080
9144	Communications Cable Installer	720
9145	Traffic Signal/Light Pole Worker*	4160
9151	Form Builder/Setter, Structures	1040
9160	Form Setter, Paving and Curb	720
9175	Laborer, Utility	520
9187	Mechanic	1440
9194	Servicer	520
9196	Painter, Structures	1040
9202	Piledriver	720
9205	Pipelayer	520
9214	Blaster	1040
9300	Asphalt Distributor Operator	1040
9303	Asphalt Paving Machine Operator	1040
9305	Broom or Sweeper Operator	320
9306	Crawler Tractor Operator	720
9315	Concrete Paving Curing, Float, Texturing Machine Operator	1040
9318	Concrete Pavement Finishing Machine Operator	1040
9329	Joint Sealer	520
9333	Concrete Saw Operator	520
9339	Subgrade Trimmer	1040
9341	Small Slipform Machine Operator	720
9342	Crane Operator, Lattice Boom 80 Tons or Less	1040
9343	Crane Operator, Lattice Boom Over 80 Tons*	2080
9344	Crane Operator, Hydraulic 80 Tons or Less	1040
9345	Crane Operator, Hydraulic Over 80 Tons	1040
9346	Loader/Backhoe Operator	1040
9347	Excavator Operator, 50,000 Pounds or Less	720
9348	Excavator Operator, Over 50,000 Pounds	1040
9351	Crusher or Screen Plant Operator	1040
9360	Foundation Drill Operator, Crawler Mounted	1040
9363	Foundation Drill Operator, Truck Mounted	1040
9369	Front End Loader Operator, 3 CY or Less	520
9372	Front End Loader Operator, Over 3 CY	1040
9380	Milling Machine Operator	1040
9384	Reclaimer/Pulverizer Operator	720
9390	Motor Grader Operator, Fine Grade*	2080
9393	Motor Grader Operator, Rough	1040
9396	Pavement Marking Machine Operator	720
9399	Concrete/Gunite Pump Operator	720
9402	Roller Operator, Asphalt	1040
9405	Roller Operator, Other	520
9411	Scraper Operator	520
9413	Off Road Hauler	520
9417	Self-Propelled Hammer Operator	520
9428	Agricultural Tractor Operator	520
9437	Trenching Machine Operator, Light	520
9440	Trenching Machine Operator, Heavy	1040
9441	Tunneling Machine Operator, Heavy	1560
9442	Tunneling Machine Operator, Light	720
9443	Percussion or Rotary Drill Operator	520
9444	Boring Machine Operator	720
9445	Directional Drilling Operator	1040
9446	Directional Drilling Locator	720
9500	Reinforcing Steel Worker	720
9509	Structural Steel Worker	1040
9513	Sign Erector	1040
9515	Spreader Box Operator	520
9520	Work Zone Barricade Servicer	720
9600	Truck Driver, Single Axle	520
9606	Truck Driver, Single or Tandem Axle Dump Truck	720
9607	Truck Driver, Tandem Axle Tractor with Semi Trailer	1040
9609	Truck Driver Lowboy-Float	1040
9612	Truck Driver Transit-Mix	1040
9615	Boom Truck Operator	1040
9705	Structural Steel Welder*	2080
9706	Welder	1040
9708	Slurry Seal or Micro-Surfacing Machine Operator	1040