• ♦Manual Notice 2018-1
• ►1. Definitions
  • ♦1. Definitions
• ►2. Introduction
  • ♦1. Overview
  • ♦2. Nondiscrimination Statement
  • ►3. Nondiscrimination Authorities
    • ♦Title VII of the Civil Rights Act (1964)
    • ♦Form FHWA-1273
    • ♦Title 49, Code of Federal Regulations, Part 21
    • ♦Title 23 CFR 230
• ►3. Program Guidelines
  • ♦1. Overview
  • ♦2. Training Programs
• ►4. Contractor Responsibilities
  • ♦1. Overview
  • ♦2. Reimbursement
  • ♦3. Records
  • ♦4. Compliance
  • ♦5. Good Faith Effort
• ▼5. Trainee Guidelines
  • ♦1. Overview
  • ♦2. Trainee Selection
  • ♦3. Wage Rates
• ►6. Goal Credit Guidelines
  • ♦1. Overview
  • ♦2. Goal Credit
• ►7. OJT Program Areas
  • ♦1. Overview
  • ►2. Contractor-Based Goals
    • ♦7.2.1 Goal Methodology
    • ♦7.2.2 Reporting Requirements
    • ♦7.2.3 Banking Credit
  • ►3. Project-Specific Goals
    • ♦7.3.1 Goal Methodology
    • ♦7.3.2 Reporting Requirements
• ►8. Department Responsibilities
  • ♦1. Overview
  • ♦2. Monitoring Requirements
  • ♦3. Annual Report
• ►9. Supportive Services (Pursuant to 23 CFR Part 230.113(f)(1)(2))
  • ♦1. Overview
  • ♦2. Texas Construction Career Academy
• ►A. Federal On-the-Job Training Program Special Provision
  • ♦1. Special Provision to Item 000 (000-2683 (04)) On-the-Job Training Program
  • ♦2. Special Provision On-the-Job Training Program for Design-Build and Comprehensive Development Agreements (Federal-Aid Projects Only)
• ►B. Overview of Training Programs
  • ♦1. Training Classifications
  • ►2. Code Listing
    • ♦ASPHALT RAKER – code 9106
    • ♦BATCHING PLANT OPERATOR, ASPHALT - code 9112
    • ♦BATCHING PLANT OPERATOR, CONCRETE – code 9115
    • ♦CONCRETE FINISHER, PAVING AND STRUCTURES – code 9124
    • ♦ELECTRICIAN* – code 9139
    • ♦TELECOMMUNICATION TECHNICIAN* – code 9143
    • ♦COMMUNICATIONS CABLE INSTALLER – code 9144
    • ♦TRAFFIC SIGNAL/LIGHT POLE WORKER* – code 9145
    • ♦FORM BUILDER/SETTER, STRUCTURES – code 9151
    • ♦FORM SETTER, PAVING AND CURB – code 9160
    • ♦LABOR, UTILITY – code 9175
    • ♦MECHANIC – code 9187
    • ♦SERVICER – code 9194
    • ♦PAINTER, STRUCTURES – code 9196
    • ♦PILEDRIVER – code 9202
    • ♦PIPELAYER - code 9205
    • ♦BLASTER – code 9214
    • ♦ASPHALT DISTRIBUTOR OPERATOR – code 9300
    • ♦ASPHALT PAVING MACHINE OPERATOR - code 9303
    • ♦BROOM OR SWEEPER OPERATOR – code 9305
    • ♦CRAWLER TRACTOR OPERATOR - code 9306
    • ♦CONCRETE PAVING CURING, FLOAT, TEXTURING MACHINE OPERATOR – code 9315
    • ♦CONCRETE PAVEMENT FINISHING MACHINE OPERATOR - code 9318
    • ♦JOINT SEALER – code 9329
    • ♦CONCRETE SAW OPERATOR – code 9333
    • ♦SUBGRADE TRIMMER – code 9339
    • ♦SMALL SLIPFORM MACHINE OPERATOR – code 9341
    • ♦CRANE OPERATOR, LATTICE BOOM 80 TONS OR LESS - code 9342
    • ♦CRANE OPERATOR, LATTICE BOOM OVER 80 TONS* – code 9343
    • ♦CRANE OPERATOR, HYDRAULIC 80 TONS OR LESS – code 9344
    • ♦CRANE OPERATOR, HYDRAULIC OVER 80 TONS – code 9345
    • ♦LOADER/BACKHOE OPERATOR – code 9346
    • ♦EXCAVATOR OPERATOR, 50,000 POUNDS OR LESS – code 9347
    • ♦EXCAVATOR OPERATOR, OVER 50,000 POUNDS – code 9348
    • ♦CRUSHER OR SCREEN PLANT OPERATOR – code 9351
    • ♦FOUNDATION DRILL OPERATOR, CRAWLER MOUNTED – code 9360
    • ♦FOUNDATION DRILL OPERATOR, TRUCK MOUNTED – code 9363
    • ♦FRONT END LOADER, 3 CY OR LESS – code 9369
    • ♦FRONT END LOADER, OVER 3 CY – code 9372
    • ♦MILLING MACHINE OPERATOR – code 9380
    • ♦RECLAIMER/PULVERIZER OPERATOR – code 9384
    • ♦MOTOR GRADER OPERATOR, FINE GRADE* – Code 9390
    • ♦MOTOR GRADER OPERATOR, ROUGH – code 9393
    • ♦PAVEMENT MARKING MACHINE OPERATOR – code 9396
    • ♦CONCRETE/GUNITE PUMP OPERATOR – code 9399
    • ♦ROLLER OPERATOR, ASPHALT - code 9402
    • ♦ROLLER OPERATOR, OTHER – code 9405
    • ♦SCRAPER OPERATOR – code 9411
    • ♦OFF ROAD HAULER – code 9413
    • ♦SELF-PROPELLED HAMMER OPERATOR – code 9417
    • ♦AGRICULTURAL TRACTOR OPERATOR – code 9428
    • ♦TRENCHING MACHINE OPERATOR, LIGHT – code 9437
    • ♦TRENCHING MACHINE OPERATOR, HEAVY – code 9440
    • ♦TUNNELING MACHINE OPERATOR, HEAVY – code 9441
    • ♦TUNNELING MACHINE OPERATOR, LIGHT – code 9442
    • ♦PERCUSSION OR ROTARY DRILL OPERATOR – code 9443
    • ♦BORING MACHINE OPERATOR – code 9444
    • ♦DIRECTIONAL DRILLING OPERATOR – code 9445
    • ♦DIRECTIONAL DRILLING LOCATOR – code 9446
    • ♦REINFORCING STEEL WORKER – code 9500
    • ♦STRUCTURAL STEEL WORKER – code 9509
    • ♦SIGN ERECTOR – code 9513
    • ♦SPREADER BOX OPERATOR – code 9515
    • ♦WORK ZONE BARRICADE SERVICER – code 9520
    • ♦TRUCK DRIVER, SINGLE AXLE – code 9600
    • ♦TRUCK DRIVER, SINGLE OR TANDEM AXLE DUMP TRUCK – code 9606
    • ♦TRUCK DRIVER, TANDEM AXLE TRACTOR WITH SEMI TRAILER – code 9607
    • ♦TRUCK DRIVER LOWBOY- FLOAT – code 9609
    • ♦TRUCK DRIVER TRANSIT-MIX – code 9612
    • ♦BOOM TRUCK OPERATOR – code 9615
    • ♦STRUCTURAL STEEL WELDER* – code 9705
    • ♦WELDER – code 9706
    • ♦SLURRY SEAL OR MICRO-SURFACING MACHINE OPERATOR – code 9708
• ►C. Reporting Forms
  • ►1. Contractor On-the-Job Training Plan Form
    • ♦Form 2203
  • ►2. Federal On-the-Job Training Program Enrollment Form
    • ♦Form 2201
  • ►3. Federal On-the-Job Training Program Monthly Reporting Form
    • ♦Form 2202
  • ►4. Labor Standards Review Form
    • ♦Form 2220, Page 1 of 2
    • ♦Form 2220, Page 2 of 2
• ♦D. Federal Regulation 23 CFR Part 230

Anchor: #i998832

Section 3: Wage Rates

The trainee will be paid the appropriate Davis-Bacon wage rates or the prevailing wage rate for training crafts on Department projects.

The contractor shall compensate the trainee at least 60 percent of the appropriate minimum journeyworker’s rate specified in the contract for the first half of the training period; 75 percent for the third quarter; and 90 percent for the last quarter, respectively.

If the apprentices or trainees are enrolled in another program approved by the Department of Labor or other agency, such appropriate rates shall apply.