Section 3: Motor-Grader
Figure 3-2. Motor-grader (maintainer) - This may be the best piece of equipment we have for snow removal. It does not require any other attachments to do the job. This piece of equipment is self-contained and ready to go.
Anchor: #i1003482Pre-storm activities
Well before a storm strikes, be sure to:
- Anchor: #VYCOAMUX
- check all fluid levels Anchor: #LNBSDIBG
- check equipment per Motor grader Inspection Checklist Anchor: #ILSQRYGG
- check blade and mold board for any damage Anchor: #BHHXFKWH
- grease turntable and all fittings to help equipment operate freely Anchor: #QWWYSHEV
- make sure all safety equipment is in place and operational Anchor: #JTMGWPRM
- check all electrical components Anchor: #ECCSPING
- call base station to ensure proper operation of state radio Anchor: #RHCNJKCD
- ensure equipment is full of fuel.
During the storm activities
While using the equipment during a storm:
- Anchor: #WMVVNEKE
- monitor the wear on the blade to prevent damage to the mold board Anchor: #KUJWAKCK
- monitor all gauges to prevent future problems Anchor: #YGKLXKVI
- perform occasional walk around to check for problems (lights, tires, fluid leaks, etc.) Anchor: #XMRXUBKQ
- check all fluid levels during operation of equipment.
Post storm activities
Once the storm is over, be sure to:
- Anchor: #JKPBLAOT
- clean equipment Anchor: #FDWVYYAI
- grease turntable and all fittings Anchor: #PRBTJNBU
- check all air filters Anchor: #DNIQJPOC
- check blade and mold board for any damage Anchor: #AFSFIKQQ
- perform a walk around for any visible damage.