Section 7: Tail Gate Spreader
Figure 3-6. Tail gate spreaders are used to apply de-icing and anti-icing materials. They are a spinner type applicator and operate via a hydraulic system.
Anchor: #i1003958Pre-storm activities
Well before a storm strikes, be sure to:
- Anchor: #HKYCVTUX
- check all hydraulic lines and fittings for leaks or wear Anchor: #DJAKGFTY
- check bearings in spinners Anchor: #FVHANXOQ
- check oil in hydraulic motors Anchor: #YJVDTXFU
- check mounting brackets that attach to the dump truck Anchor: #FVMLRETA
- lubricate all moving parts Anchor: #HPUHNAOT
- mount to truck to assure proper operation Anchor: #VNFLNYJD
- calibrate equipment for specific application rate desired.
During the storm activities
While using the equipment during a storm:
- Anchor: #YRXTKAAJ
- perform occasional walk around to check for problems (lights, leaks, etc.) Anchor: #BAJSNYDX
- check for accuracy of material application.
Post storm activities
Once the storm is over, be sure to:
- Anchor: #MDOVWUYY
- clean equipment Anchor: #EEHPOHEB
- check for any hydraulic leaks Anchor: #JUGFCXVP
- lubricate all points on bearings and moving parts Anchor: #ARKNQXTE
- check all hydraulic hoses and fittings for wear Anchor: #NHDBCSBT
- check all welds for fatigue cracks.